sábado, 24 de abril de 2010

Zaber Technologies Releases XYZ Series Three-Axis Stages – XYZ Stages




Zaber is proud to release its XYZ Series Three Axis Stages Series Overview: • 13 x 13 x 13 mm to 450 x 450 x 450 mm travel • Built-in controllers • Several units daisy-chain to a single serial port • Available in various speed / resolution options • Combine various Zaber stages to help you build a wide range of multi-axis systems from XY to XYZ Theta to Gantry Description: Zaber's XYZ series products are made up of 3 linear stages. They come packaged with all the accessories you will need to operate the linear slides in an XYZ configuration. The XYZ stages are powered by a standard power supply and connect to the RS-232 port of any computer. About Zaber: Zaber Technologies Inc. was founded in 1997 when precision motion control was typically accomplished with DC motors and encoders. In 2000 Zaber introduced the first daisy-chainable miniature linear actuator based on stepper motor technology with integrated RS232 communications and control electronics in one small package. Since then, Zaber has added over 120 products to its family of precision motion control and laboratory automation devices including linear actuators, linear slides, motorized x-y-z stages, rotation stages, motorized mirror mounts, and micro-stepping motor controllers. More information on Zaber is available at www.zaber.com.

Light curtain ASTEEL SENSOR




The SB series, new generation barrier, incorporates all the standard features necessary for your security applications. Its small size (28 x 30) allows it to fit perfectly into the mechanical dimension of the machine. The SB series is available in multiple sensitivities to protect the hand, arm and body. His dead zone, very small size, allows for assembly in U or L maintaining the sensitivity throughout the detection area. Its statics outputs, PNP 400mA, allow it to interface directly to relay or safety automaton. This series comes in 3 versions (standard, plus version, Master / Slave version) to adjust the security functions at the lowest cost.

Capacitive proximity sensor ifm electronic




In all automated processes the use of sensors to provide information for the plc is of prime importance. Sensors supply the necessary signals on positions, end stops, levels or serve as pulse transmitters for counting jobs or for monitoring rotational speed. In industrial usage inductive and capacitive proximity switches are indispensable. As compared to mechanical switches they offer almost ideal conditions: non-contact, maintenance-free operation, high switching frequencies and switching accuracies as well as high protection against vibration, dust and humidity. Inductive sensors detect all metals without contact, capacitive sensors detect nearly all solid and liquid media such as metal, glass, wood, plastic, water, oil, etc... Both inductive and capacitive proximity switches are available in NAMUR versions. In conjunction with an NV0100/NV0200 amplifier the sensors can be used in zone 1 hazardous areas (the amplifier which contains Zener barriers as well as power supply and output must be mounted outside the hazardous area).

DC / AC power supply :combined sine wave inverter / battery charger




The Mass Combi, inverter and battery charger in one, is increasingly playing a leading role in carefully designed electrical systems. Mastervolt has integrated the most advanced technology into a compact package, allowing owners to get the most value for their money. This offers you high-quality basic support for smaller systems without requiring a great deal of space. You will not have to worry anymore about the quality of shore power in any port - things will always work with the Mass Combi! The most vital functions in your electrical system now come within reach: battery charging, supplying 230V power, switching and the use of extended AC loads to be utilized on board, even when limited shore power is available. Power can be drawn from a shore connection, generator or charged batteries. Mastervolt's three-step Plus© charging method guarantees more battery power and a longer life span. Batteries are always fully charged and fast, even when a generator is used. And the clean 230V/50Hz power supply is perfectly reliable

FFS bagging machine





The FFS system forms bags from an endless gusseted tubular film, fills and seals them - rationally, automatically, precisely, ecologically, safely and inexpensively. The results are compactly filled block-shaped bags that can be stacked onto pallets easily - especially thanks to the optionally integrated corner welding device that seals the gussets diagonally. The bag bottoms are perfecly formed. Machine output: FFS ALPHA up to 500 bags per hour (net variant) up to 300 bags per hour (gross variant) FFS BETA up to 800 bags per hour FFS GAMMA up to 1,200 bags per hour FFS DELTA up to 1,800 bags per hour

Compressed air vacuum cleaner NOVAIR OXYPLUS TECHNOLOGIE



The AirVac II Super is a totally integrated, compact and portable vacuum cleaner combined to an air blowing system. Both devices can be used at the same time. It includes as standard accessories: - a blowing gun with an extendable tube. - a flexible suction tube. - a cannulas set. - a brushes set. - extra dust bags. A wide range of accessories allow you to adapt the AirVac II Super to your specific needs.

Aerial platform Skyjack




Skyjack’s Full-Size Series Rough Terrain Scissor Lifts deliver huge platforms, soaring work heights and heavy duty capacities— all in one package! A fuel efficient GM 1.6L Vortec dual fuel engine powers Skyjack’s robust axle based 4WD system resulting in 30% gradeability.

The SJ 9250 features an expansive platform, up to 24’ in length, when optional 5’ powered extension decks are added to the front and back of unit. With a working height of 56’, and standard independant/auto leveling outriggers, the SJ 9250 can meet the challege of any
job site.

As with every Skyjack model, these units use an analog based control system, featuring Skyjack’s standard color coded and numbered wiring, for ease of troubleshooting

CNC rotary transfer machine MANDELLI



Vertimac transfer machines allow to produce profitably both big and small batches of complex components, belonging to various families of pieces.

Thanks to proper clamping fixtures, it is possible to machine up to five sides with only one positioning.

The materials generally worked are aluminium, cast iron, steel and brass.

The essential characteristic of Vertimac is its high structural flexibility: these machines are supplied with a variable number of stations, ranging from a minimum of 4 to a maximum of 14, and each station, excluding the loading/unloading one, can be equipped with 3 or more unit heads.

The frames, made of electrowelded steel with double-walled cellular structure, assure high static and dynamic rigidity. Consequently, all cutting forces are perfectly absorbed, enabling to carry out heavy roughing operations in one station and high accuracy machining in the following station.
The various wide lateral windows of Vertimac assure an immediate and total accessibility to tools and fixtures, drastically reducing set-up and change over times. Moreover, the hanging table allows the downward free fall of chips and coolant, also enabling the machining of materials which produce long chips.

The highest productive efficiency is assured by the use of in-process dimensional controls, of monitoring systems and of devices for the automatic recovery of the tool wear, and by a complete and efficient diagnostics.

5 cylinder turbocharged diesel engine SCANIA Industrial Marine Engines




Scania’s industrial engines are used in equipment for construction, agriculture, forestry, container handling and more. The engine range consists of a 9-litre 5-cylinder engine, a 12-litre engine 6-cylinder and 16-litre V8 engine. They cover a power range from 177kW (240 hp) to 432kW (588 hp).

viernes, 23 de abril de 2010

Compressed air vacuum cleaner NOVAIR OXYPLUS TECHNOLOGIE




The AirVac II Super is a totally integrated, compact and portable vacuum cleaner combined to an air blowing system. Both devices can be used at the same time. It includes as standard accessories: - a blowing gun with an extendable tube. - a flexible suction tube. - a cannulas set. - a brushes set. - extra dust bags.

FFS bagging machine



The FFS system forms bags from an endless gusseted tubular film, fills and seals them - rationally, automatically, precisely, ecologically, safely and inexpensively. The results are compactly filled block-shaped bags that can be stacked onto pallets easily - especially thanks to the optionally integrated corner welding device that seals the gussets diagonally. The bag bottoms are perfecly formed. Machine output: FFS ALPHA up to 500 bags per hour (net variant) up to 300 bags per hour (gross variant) FFS BETA up to 800 bags per hour FFS GAMMA up to 1,200 bags per hour FFS DELTA up to 1,800 bags per hour

High pressure hydraulic motor White Drive Products



The WS targets agricultural equipment, skid steer attachments, and other applications that require greater torque under demanding conditions. A distinguishing feature of the WS in relation to competitive products is its heavy duty drive link with a larger pitch diameter. This enables the WS to better withstand pressure and torque spikes and is reflected in its intermittent and peak performance ratings. Additional product features include a three zone commutator valve, heavy-duty tapered roller bearings, and case drain with integral internal drain*. The WS offers displacements from 100cc [6.1in³] to 496cc [30.3in³]. Nine (9) shaft and seven (7) mounting options are available to meet the most common SAE and European requirements

Air operated hydraulic pump HYDRATRON



Hydratron Air Operated Hydraulic Pumps are capable of generating output pressures of up to 45,800 PSI ( 3,160 Bar ) when supplied with just 100 PSI ( 7 Bar ) air pressure. There are 4 model ranges offering flows of up to 7 gpm ( 31.7 Ltr per min ).
These pumps will maintain pressure within a system indefinitely without consuming power or generating heat plus their output pressure can be infinitely varied by simply regulating the driving air pressure.
These pumps are ideal for pressure testing, chemical injection and for hydraulic power applications. Standard models are suitable for oil or water service having wetted parts manufactured from stainless steel and aluminium bronze. Options include all stainless steel wetted parts for pumping more aggressive chemicals with isolation chambers which keep the pneumatic and hydraulic sections of the pumps completely separate. This is particularly desirable when pumping hazardous fluids.
Pumps can be supplied individually or mounted in Power Pack form in which case they are mounted within metal frames complete with reservoirs, all necessary air controls, output pressure gauges and pressure release valves.

jueves, 22 de abril de 2010

DC / AC power supply :combined sine wave inverter / battery charger




The Mass Combi, inverter and battery charger in one, is increasingly playing a leading role in carefully designed electrical systems. Mastervolt has integrated the most advanced technology into a compact package, allowing owners to get the most value for their money. This offers you high-quality basic support for smaller systems without requiring a great deal of space. You will not have to worry anymore about the quality of shore power in any port - things will always work with the Mass Combi! The most vital functions in your electrical system now come within reach: battery charging, supplying 230V power, switching and the use of extended AC loads to be utilized on board, even when limited shore power is available. Power can be drawn from a shore connection, generator or charged batteries. Mastervolt's three-step Plus© charging method guarantees more battery power and a longer life span. Batteries are always fully charged and fast, even when a generator is used. And the clean 230V/50Hz power supply is perfectly reliable

Célula robotizada de colada para funciones Vulcan Engineering




Automated Casting Pouring Stations Automatic Pouring Basin Manipulator The automatic pouring basin manipulator, controlled and powered by the automatic ladler, completes the automation of the pouring operation by lifting the pouring basin from one flask, inverting the basin for blow-out, and setting the basin in place on the next flask. Features One (1) Automatic Ladler Pouring capacity to 200 pounds (91 kg.) of aluminum Radius of approximately 80 inches (2030 mm) Maximum 270 degree rotation capability Includes mechanical operating unit, hydraulic power unit, and electrical controls. Mechanical Operating Unit A heavy steel base plate supports the hydraulic rotary actuator and rotating superstructure. The rotating base carries the ladle support arms and the hydraulic cylinders, which raise the arms and tilt the ladle. Electronic position feedback and proportional control valves are used on all motions. All bearings used on the hot end of the ladle support arms are nitrided H-13 tool steel. Sheet steel shielding is used to guard all operating components at the base of the unit. Two fabricated steel ladle cups are included with the mechanical operating unit.

Maquinas de Trituración y Cribado




Para satisfacer la demanda de los clientes, nuestra empresa diseña Planta de trituración y de cribado sobre orugas, De alto rendimiento, alta fiabilidad, atractivo en apariencia, productos similares a los estándares internacionales.

Trituradoras alto rendimiento, totalmente completo de accionamiento hidráulico de los vehículos y la integración de alimentador, criba vibratoria, transportadores, máquinas de tamizado bajo el cinturón, la instalación de vehículos, montados en vehículos de motor eléctrico y de control integración de caja.

Se aplican a la carretera y la construcción de puentes, la construcción urbana, la metalurgia, la energía y de otros departamentos para llevar a cabo la trituración, cribado y otras operaciones.

domingo, 11 de abril de 2010

Maquina cortadora de papas

Desarrollada por GMF-Gouda of Waddinxveen ha sufrido diseños e reingeniería de su antiguo diseño, mejorando su capacidad, mantención, uso. La nueva peladora y removedora en seco puede ser utilizada en el industria del procesamiento de papas y vegetales congelados, así como en la industria del enlatado, garantizando capacidades de proceso de 45 toneladas hora , las 24 horas del día.
Para realizar la operación de separación utiliza vapor, separando en la práctica el 95% de los residuos de cáscara

Se realizaron cambios en los ejes y cepillos para disminuir sus pesos .

Incorpora además limpieza CIP ( clean in place), por lo que piezas especificas o difíciles de acceder pueden ser limpiadas